WaterFurnace Logo

Synergy3D

The WaterFurnace Synergy3D™ heating, cooling, radiant floor heat.

3 in 1 Geothermal Heat Pump

The WaterFurnace Synergy3D combines forced air heating and cooling along with radiant floor heat.

Efficient with Maximum Comfort

The WaterFurnace Synergy3D combines the luxurious comfort of radiant heat while providing traditional forced air heating as well.

Energy Savings

The WaterFurnace Synergy3D systems delivers over four dollars of energy for every dollar of electrical energy used. That's an efficiency rating of over 400 percent. The best high-efficiency gas furnace delivers about 97 cents of energy for every dollar spent on fossil fuels.

WaterFurnace Synergy3D

WaterFurnace Synergy 3D

Hayter Group Logo
Radiant in-floor heating systems are made up of tubes located underneath the floors. Warm water flows through those tubes. That warmth radiates up from the floors and warms everything it comes in contact with.

Radiant systems can be installed under any type of floor covering. The Hayter Group retrofits radiant in-floor systems in existing homes. If you are building a new home it's the perfect time to install a radiant system.

The Hayter Group offers turn-key solutions including both home comfort equipment and heat delivery (forced air duct-work or radiant floor tubing).

Click here to learn more about in-floor heating.

Radiant In-Floor Heating

Radiant In-Floor Heating

Heating and Cooling

Your WaterFurnace Synergy3D Series provides you with both heating and cooling, quietly and efficiently. You can get rid of your unsightly and noisy outdoor air conditioning unit.

Safety

Unlike gas, propane, wood or oil furnaces, there is no open flame with a WaterFurnace geothermal heat pump. There is not carbon monoxide gas to worry about. Your heat pump does not need to be ventilated to the outside.

Hot Water Assist

The Synergy3D preheats your water and sends it to your water heater. The unit controls and monitors heat pump conditions and determines when there is excess heat available to send hot water to your water heater. This system utilizes heat in the most efficient way possible.

Get rid of Outdoor Equipment

Improved Air Quality

Large, high efficiency MERV 11 filters come standard on the WaterFurnace 5 Series to provide exceptional indoor air quality, protecting your family from dust and allergens.

Because your unit runs more often, at a lower quieter speed than a traditional furnace, your home's air is filtered more often.

Optional Washable Filter

The Hayter Group offers an electrostatic washable filter as an option. Electrostatic filters use static electricity to remove up to 90% of pollutants in your home's air. There is no electrical connection for the filter. It operates on the same principle as a comb rubbed up against a sweater. The static charge in the filter attracts particles in the air to the filter's media.

WaterFurnace MERV 11 Filters
WaterFurnace ECM Motor

WaterFurnace ECM Motor

A variable speed ECM (Electronically Commutated Motor) motor runs at only the speed needed to maximize efficiency. When Active De-humidification is enabled, the fan adjusts to maximize moisture removal.

WaterFurnace 5 Series Aluminum Air Coil

WaterFurnace Aluminum Air Coil

WaterFurnace Synergy3D Series units feature aluminum air coils that are durable and will extend the life of your equipment.

WaterFurnace 10 Year Warranty

The WaterFurnace Synergy 3D Series comes standard with a 10-year warranty on all parts. Select The Hayter Group as your geothermal contractor and we add a 10-year labour warranty and a lifetime warranty on your earth loop.